Liqui Moly Engine Flush

Engine flush is something that few people know about, but everyone should know about. When you change the oil in an engine, there will always be some of the old oil left with the associated soot, sludge and deposits that have grown on the inside of the engine. With engine flush, soot and deposits are effectively dissolved and the engine is clean for the new oil. Without the use of engine flush, it is equivalent to pouring fresh milk into the same old milk carton in the refrigerator every time the date expires.... Not very tasty, and not very good for YOUR engine either.

Application:

The can of Engine Flush contains 250ml, which is enough for 4.5L of engine oil. Engine Flush may only be used on 4-stroke engines. Add the contents of the can to the engine oil at operating temperature (do NOT drain the oil). Then start the engine and let it idle for 10 minutes. During the 10 minutes, you should activate the clutch several times (keep the clutch pulled for a few seconds each time) to remove soot and slag residue from the plates. Do NOT rev the engine! Then stop the engine and drain the oil and engine flush. Replace the oil filter and fill new fresh oil into the clean engine *Suitable for engines with wet clutch https://youtu.be/WcoGT-EwuMQ?si=3ktZdMsEaX8p2IBa