With a Hyperpro shock absorber for the DUCATI MULTISTRADA 1200 you get full control over your motorcycle.

The shock absorber from Hyperpro is fully adjustable and allows you to adjust all parameters of the shock absorber, from preload to rebound and hi+low speed compression. The shock absorber is fitted with an external oil/nitrogen reservoir, which via a hose, expands the oil capacity, thereby increasing the cooling of your shock absorber. This provides uniform damping, in all conditions. When you buy a Hyperpro shock absorber for DUCATI MULTISTRADA 1200 you get a shock absorber that can be customized 100% according to your wishes and needs. All shock absorbers are delivered as a starting point to fit a driver of 95-100kg including equipment. However, if you are significantly heavier or lighter than this, it is possible to have a weight-adjusted spring mounted. You can select this under related items when you put the shock absorber in the basket. The same applies to hydraulic spring preload and adjustable length. On many shock absorbers this is also an option. You will be able to read below whether it is an option for your motorcycle, and if it is, you can also add this when you have put the shock absorber in the basket. It is important that you note your weight under comments if you choose to purchase a weight-specific spring. It is also important that you note whether your shock absorber should be raised or lowered, if this appears as an option further down.

Preload:

This shock absorber is available with hydraulic preload adjustment as an option. The hydraulic preload adjustment allows you to add more spring preload by turning a hydraulic knob to compensate for heavy luggage or a passenger. You can purchase hydraulic preload by adding this item to the cart and see the options under the product here.

Rebound

This shock absorber has adjustable rebound, or in Danish, return damping.

Compression

This shock absorber type has adjustable Hi and Low speed compression damping. This does not mean that you have to adjust low speed when driving slowly, and hi speed when driving fast. It means that you have an adjustment screw to handle instability on soft bumps and hills (low speed). As well as an adjustment screw to handle sharp-edged holes and small bumps. (Hi speed)

Length adjustment:

This shock absorber is available with adjustable length, as an option. This option gives you a number of tools in terms of correct geometric setup. Instead of using your preload to regulate the height of your motorcycle, and going beyond the optimal SAG settings, with adjustable length on the shock absorber, you can find the right balance in the bike. Without compromising your SAG adjustment.

Raising or lowering

On some shock absorbers it is possible to get the shock absorber in a longer or shorter model. This is super smart if you want to lower your bike, for example. If measurements are given below, you can get the shock absorber the number of mm shorter that the minus indicates and the number of mm longer than the plus indicates.