Motorbike Oil Additive - a friction-reducing additive to pour into the oil on motorcycles.

Molybdenum sulfide (MoS2) is the key ingredient in this additive that reduces friction in the engine and reduces wear by up to 50%, which is scientifically proven. The additive extends the life of the engine and provides smoother gear changes and a quieter engine. The MoS2 additive is intended for all 2 and 4 stroke engines with both separate and mixed lubrication. It can be used with multi-plate clutches in an oil bath without any problems, but ALWAYS make sure to run an Engine Flush and fill with new Liqui Moly oil before filling with Liqui Moly Oil Additive. In addition, you should always be careful and not exceed the recommended dose. As too much additive can cause the clutch to slip. On motorcycles with many kilometers on the counter, you should use a maximum of 70% of the recommended dose. The additive is recommended at every oil change and for 4-stroke engines, a maximum of 30ml of additive is used per liter of engine oil with a dry clutch, and a maximum of 20ml of additive per liter of engine oil on motorcycles with a wet clutch. On 2-stroke engines, a maximum of 20ml per liter of 2-stroke oil is recommended on bikes with separate lubrication, and 10ml per liter on motorcycles with mixed lubrication.

Addition

Recommended at every oil change or, for 2-stroke engines, at every refueling. 4-stroke engines: 30 ml per liter of engine oil or with wet clutch 20 ml. 2-stroke engines: -with separate lubrication: 20 ml per liter of 2-stroke oil - with mixed lubrication: 10 ml per 10 liters of mixture.

Tech tips

Contains 125ml Check Liqui Moly's oil guide by clicking here : https://youtu.be/Zn-aRYjxtIs?si=-CtOvEbB4G2u0SBI